Bathroom Waterproofing

Dampness, dripping walls, or seepage are problems most of us are familiar with in the house. The bathroom is one of the major wet areas of the house as it is exposed to water continuously. This dampness not only damages the internal walls, it also gets extended to adjacent walls, creating hassle for the residents and incurring huge repair costs in the future. Thus, bathroom waterproofing is extremely important. The application creates a suitable membrane of a product that doesn’t allow any moisture to pass through it all. The bathroom waterproofing paint products are a one-stop solution to fix the cracks and tile joints and ensure a cleaned and dried bathroom. There is a range of bathroom waterproofing chemical products to seal the critical areas like floor bed, splash zone, sanitary, drainage pipe, etc. that helps make the bathroom watertight.

Waterproofing Different Areas Of Bathroom

It is always a good idea to undergo complete waterproofing in the bathroom. This will ensure the entire bathroom floor and shower recess are waterproofed. If the budget doesn’t allow it, waterproofing for bathroom tiles and waterproofing for bathroom walls is crucial so that the water does not get into the substructure of the house and causes major damage and loss of money. You can prevent shower leaks by fixing them with techniques for waterproofing the bathroom without removing tiles. In the bathroom, the air holds a lot of moisture and is humid as the air is coming in contact with a cold surface like a mirror and tiles. When someone uses the bathroom, the humidity increases, creating small droplets of water on the surface. Thus, waterproofing bathroom ceiling panels protect a home from moisture-borne fungus or deterioration. Therefore, they highly recommend getting the tile watertight, especially for the bathroom and shower area.

Choose Your Waterproofing Products

You can get the best quality and efficient products known for delivering long-lasting results with AapkaPainter. They have an array of products from leading companies like Dr. Fixit bathroom waterproofing. To get one stop-solutions for all your bathroom leakage and seepage, you can also consider Asian paints bathroom waterproofing or Perma bathroom waterproofing. The best way to decide among these leading brands is to calculate the cost of paint per square foot among the best paint options with the help of their paint cost calculator. You can also click on the waterproof price calculator feature to get a fair understanding of the best waterproof solution cost as per your unique budget. This way, you will set your painting budget right and not go over the budget.

Steps Involved In Bathroom Waterproofing

1. Check adhesion of the surface:

A test strip is used to check the adhesion or the bonding strength of the surface. Accordingly, the expert takes the necessary steps to pre-treat or proceed without it.  

1. Clean the work area before installation:

For the best results, the floors and walls should be thoroughly cleaned, grease-free, and dry.

1. Apply pieces to the corners:

Applying the corner pieces is the best way to begin the waterproofing process. They apply constant pressure with the help of a smoothening tool, like a squeegee or spatula, to remove the air pockets, and seal the membrane.

1. Cover all corners and edges with tape:

Thereafter, one can cover the corners with sealing tape. One should be careful during the removal of protective film by applying pressure and removing the air pockets using smoothening tools.

1. Waterproof plumbing and fittings:

Make sure the pipes and fittings coming out of the floor are free from plaster residue. Thereafter, include the wall sleeves to seal all the plumbing fittings and pipes. Remove all the air bubbles with the help of a squeegee/ spatula.

1. Apply the waterproofing membrane to the walls:

Remove 10 cm of protective foil on the backside of the membrane and in the top-to-bottom direction, and apply it to the walls overlapping the corner sealing tape. Be careful not to damage the membrane while removing the foil and use the tool to remove the excess air pockets.

1. Proper finishing and correction:

In case of any repair, place the corner tape below the strip and let it overlap the next membrane. Use the finishing tape to cover the last strip and seal it. 

1. Cover the floor with a membrane for bathroom sealing:

Last, finish the process by waterproofing the shower and bathroom flooring. Use the membrane to cover the shower drain with sufficient overlapping between the two sealing membranes.

1. Remove Shower Drain:

After complete sealing, carefully cut out the membrane, covering the shower drain to open up the channel. 

10.  Your Waterproofing is all done! Now start tiling:

You can use the tile adhesive and start tiling on the waterproofing membrane. 

Why Choose Aapkapainter For Bathroom Waterproofing Services?

Trained Professional:

They offer an array of waterproofing services with the help of trained, professional, and certified experts/applicators in the home’s comfort. They use high-quality waterproofing chemicals that do not cause any damage to the interiors while keeping the budget in mind.

Safety Protocols:

AapkaPainter has taken all the measures to provide a secured and safe environment to its customers. They fully vaccinate their professional team, maintain social distancing and wear masks regularly. In areas of high risk, the painters use full PPE kits. They also encourage more online mediums of communication by using online tools for clients and workers to reduce physical contact.

Site Sanitization:

All the project sites are cleaned and sanitized before as well as after the work. This not just maintains hygiene, but also helps in the smooth process of waterproofing. To ensure zero risk, they covered all the furniture with special material. Post work, they cleaned the surface with disinfectants.

Great Service Warranty:

While manufacturers of paint directly provided paint product warranty with their terms & conditions, Aapkapainter provides a great service warranty of 1 year in the selected painting system too.

FAQs

Which waterproofing is best for a bathroom?

Dr. Fixit Bathseal or Dr. Fixit Pidifin 2K product is one of the best ranges of waterproofing products. They provide a seal to the leakage to ensure one-stop solutions for a clean and dry bathroom. We can use these in critical areas of the bathroom like the floor bed, shower area, sanitary fittings, and drainage pipes.

How do I waterproof my shower walls before tiling?

The most effective way to waterproof your shower wall before tiling is by applying a separate waterproofing membrane on the primed shower walls. You can use the smoothening tool to remove any excess air pockets. This will prevent mold growth and stud rot to grow and destroy the interiors.

How much of a bathroom needs to be waterproofed?

Ideally, if the bathroom floor is above ground level or made of particle board, plywood, or timber, the entire floor within the shower area or the bathroom should be waterproofed. The walls should be waterproofed to at least 150 mm, and the step-down or hob onto the bathroom floor must be waterproofed by at least 100 mm.