Dr Fixit Expansion joint Treatemt with PU Sealant price 1 ltr, 20 litre price, colours shades, 10 4 colors

Dr Fixit Expansion joint Treatemt with PU Sealant

Surface Preparation : All surfaces should be clean, dry, free from grease, oil or dust and any contaminants that could harm bonding. Remove old sealant residue completely before applying new sealant . Wire-brushing the internal sides of the concrete where the sealant is to be applied . Joint edges If spalled, it should be rectified properly with PMM by using Dr. Fixit Pidicrete URP in the ratio of 1:5:15. Filling . Wire-brushing the top surface of the concrete upto atleast 200 mm on either side of the expansion joint. Allow the substrate to dry after degreasing. Backer rod Providing and fixing the polyethylene joint backing rod as a backup material into the expansion joint leaving adjust width to depth ratio and falling of sealant while application top of the slab . Fix a bond breaker tape over the backup material to prevent third surface adhesion . Fix a masking tape on both sides of joint surface to get neat & clean appearance Application Providing and apply Dr. Fixit Pidiprime A on two sides of the properly prepared joint surface by brush and allow it cure for minimum 20 minutes before filling the Dr. Fixit PU sealant (for joint width upto 30 mm ). Insert the sausage in hand operated application gun . Immediately clean up any excess sealant with a solvent from M/s Pidilite Industries having elongation of 500% into for 25 mm (w) x 12 mm mm deep Depth shall be 2:1 (half) upto the surface of the slab. As per as per the technical specification of manufacturer & consultant. Protection Protect the sealant with Joint sealing tape . Providing and fixing aluminium sheet onto concrete, screwing it at every 300 mm distance on either side of the

  • Category:  

  • Washability:  

Dr Fixit Expansion joint Treatemt with PU Sealant Price

Features & Benefits

Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion.

Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.

Permeability – It reduces the permeability of water into concrete.

Strength – The setting time and compressive strength of the concrete remains within the specification limits.

Shrinkage – Reduces shrinkage crack development in plaster & concrete.

Workability – Improves workability of freshly mixed cement concrete.

Durability – Increases durability by improving waterproofing of concrete.

Product Process

Step 1

Surface Preparation Remove dust, laitance etc. by wire brush and broom. Clean the surface with water and make Surface Saturated Dry (SSD) condition. Check the surface moisture content and temperature before application of the coating.

Step 2

Dressing at Junctions Apply the first coat of Dr. Fixit material on the angle fillet. Place and soak 150 mm width of 45-micron open woven glass fiber mesh as reinforcement on the wet first coat to arrest cracking.

Step 3

Coating Application Apply

Paints Products

Others

Others

Category:

Brand: Dr Fixit

View Details
Expansion joint Treatemt with PU Sealant

Expansion joint Treatemt with PU Sealant

Category:

Brand: Dr Fixit

View Details
Horizontal Expansion Joint BOQ

Horizontal Expansion Joint BOQ

Category:

Brand: Dr Fixit

View Details
Vertical Expansion Joint (BOQ)

Vertical Expansion Joint (BOQ)

Category:

Brand: Dr Fixit

View Details
Vertical Expansion Joint - BOQ

Vertical Expansion Joint - BOQ

Category:

Brand: Dr Fixit

View Details

Waterproofing FAQs

Service Features

Trained & Certified Applicators

Trained & Certified Applicators

Dedicated Project Managers

Dedicated Project Managers

Quality Assurance

Quality Assurance

Safety Protocols

Safety Protocols

Genuine Pricing

Genuine Pricing

Top Rated by Customers

Top Rated by Customers

Waterproofing Brands