Dr Fixit Dr. Fixit Fastflex for Swimming Pool Waterproofing BOQ

Dr Fixit Dr. Fixit Fastflex for Swimming Pool Waterproofing BOQ price 1 ltr, 20 litre price, colours shades, 10 4 colors
desk-soft-image
Category
washability-image
Washability
Select size
Price
house-waterproofing-icon
Find out how much your waterproofing will cost
Estimate waterproofing cost
Available sizes Price
Product details
Packaging Size
Brand
Colour available White & 2892 other shades
Finish
Washability
Type
Category

Dr Fixit Dr. Fixit Fastflex for Swimming Pool Waterproofing BOQ

Surface preparation : 1.1.Clean the application surface with wire brush or water jet, grinder as required. Remove all loose particles . Grout pipe inserts and gaps around the water pipes, & plumbing Sq.fts pipes, with polymer modified mortar prepared with Dr. Fixit Pidicrete URP 10 % by weight of cement. Aangle fillet 1.2 Providing 50 x 50 mm Aangle fillet on all vertical up-stands & junctions /corners with sand -cement mortar, mixed with Pidicrete URP(5kg per 50 kg bag of cement) all around the periphery of the of the Swimming pool. Application 1.3 Providing minimum two coats of Dr. Fixit Fastflex of M/s Pidilite Industries Ltd , an acrylic polymer modified cementitious coating system . After the 1st coat is complete 6 to 8 hrs after completion of first coat, take up second coat application in a direction perpendicular to the first. Sprinkle coarse sand while the second coat is still wet for vertical wall application . Complete the application and leave to air cure for 3 to 5 days. The material having following technical properties: Elongation at break 120 % minimum - ASTM D 412 Adhesion strength 0.8 minimum N/mm2 - ASTM D 4541 Reduction of rapid chloride permeability, 92% (Compared to control) as per ASTM C 1202-97 Toxicity Passes as per BS 6920 part I : 2000 ,Food grade certification CFTRI certification Passes. Screed / Plaster Providing and rendering 15 to 20 mm thick cement plastering on Internal walls & bottom surfaces of concrete swimming pool in two layers consisting of 8 mm thick sand faced plaster in cement mortar 1:4 (1 cement :4 fine sand) top coat mixed with integral water proofing compound and specified fibers over a base coat of 12 mm thick rendering in cement mortar 1:4 (1 cement :4 coarse sand), by adding Integral Water proofing compound Dr. Fixit Pidiproof LW+ 200 ml per 50 kg bag of cement of M/s Pidilite Industries Ltd .

Features & Benefits

Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion.

Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.

Permeability – It reduces the permeability of water into concrete.

Strength – The setting time and compressive strength of the concrete remains within the specification limits.

Shrinkage – Reduces shrinkage crack development in plaster & concrete.

Workability – Improves workability of freshly mixed cement concrete.

Durability – Increases durability by improving waterproofing of concrete.

Product Process

Step 1

Surface Preparation Remove dust, laitance etc. by wire brush and broom. Clean the surface with water and make Surface Saturated Dry (SSD) condition. Check the surface moisture content and temperature before application of the coating.

Step 2

Dressing at Junctions Apply the first coat of Dr. Fixit material on the angle fillet. Place and soak 150 mm width of 45-micron open woven glass fiber mesh as reinforcement on the wet first coat to arrest cracking.

Step 3

Coating Application Apply

Paints Products

Dr. Fixit Fastflex for Swimming Pool Waterproofing BOQ

Dr. Fixit Fastflex for Swimming Pool Waterproofing BOQ

Category:

Brand: Dr Fixit

View Details

Waterproofing FAQs

Service Features

Trained & Certified Applicators

Trained & Certified Applicators

Dedicated Project Managers

Dedicated Project Managers

Quality Assurance

Quality Assurance

Safety Protocols

Safety Protocols

Genuine Pricing

Genuine Pricing

Top Rated by Customers

Top Rated by Customers

Waterproofing Brands